Endurance 402 extendable conductivity sensor

Endurance 402 extendable conductivity sensor

402 extendable conductivity sensor is ideally suited for application under pressure, since it does not require process shutdown to install or remove the sensor during preventive maintenance and replacement. Long stainless steel pipe is available for 402 mode sensor to increase the injection depth from 2.34 to 5.34 inches. Terminal box at the end of the pipe (ordered separately) makes sensor replacement simple and allows operator to tighten control during sensor installation and removal under the pressure. Maximum pressure: 64 psi (2542 kPa). There are two types of devices (made of stainless steel) for sensor injection/removal. PN 23765-00 set is applied for 402-11/12/13 models and 23765-01 set is use for 402-14 PN model. The only difference between two sets is the length of a clip-on adapter coupling. The kit includes ball valve for 1-1/4 in., 1-1/4 in. connecting fitting with mechanical normal pipe thread (MNPT) and clip-on adapter coupling with graphite filler rings and retaining clip for sensor installation to the required injection depth.

Technological information and specifications
Characteristics MODEL
400/400 VP
MODEL
02/402 VP
MODEL
403/403 VP
MODEL
404
Cell constant 0.01/cm, 0.1/cm, 1.0/cm 0.01/cm,  0.1/cm, 1.0/cm,  10.0/cm 0.01/cm,  0.1/cm, 1.0/cm,  10.0/cm 0.01/cm, 0.1/cm,
Temperature interval  0-105°C
With option 60: 0-200°C
0-100ºС Options-11,  12,-13: 0- 105ºC (32 – 221ºF), sterilization up to  135ºС (275ºF) Option-16: 0-60ºC (32-140ºF)
Options-17: 0-100ºC ( 32-212ºF)
Pressure Max. 250 psi² (1825kPa) 200 psi ² (1481kPa) maximum extension pressure 64 psi², (542 kPa) 250 psi² (1825kPa) Option-16: 100 psi² (791 kPa) at 77ºF (25ºC 20 psi²  (239 kPa at 140ºF  (60ºC)

Option-17: 100 psi² (791 kPa)

Wetted materials Titanium, 316 stainless steel, PEEK, EPDM

 

Options -11, -12, -13: Titanium, 316 stainless steel, PEEK, EPDM, graphite, neoprene

Option-14: graphite, 316 stainless steel, Ероху, EPDM, neoprene

Titanium, 316
stainless steel, Kel-F, EPDM 
Option -16: Titanium, PEEK, PVC, EPDM, polyethylen

Option-17: Titanium, 303
stainless steel, PEEK, EPDM

Mounting type Cut-in Extendable (without process shutdown) Sanitary flange In-flow (low flow)
In-built cable 10 feet (3.1m)
standard
*additional 50 feet (15.2 m)
10 feet (3.1m)
standard
*longer length available
10 feet (3.1m)
standard *additional 50 feet (15.2 m) with terminal box option -60
10 feet (3.1m)
standard
*additional 50 feet (15.2 m)
Process connection ¾ ′′  MNPT 1-¼ ′′ MNPT
ball valve
-20  1-½ ′′ sanitary flange
-21  2′′ sanitary flange
3/8 ′′ serrated nozzle for plastic pipeline or  ¼ ′′ nozzle

402 extendable conductivity sensor is ideally suited for application under pressure, since it does not require process shutdown to install or remove the sensor during preventive maintenance and replacement. Long stainless steel pipe is available for 402 mode sensor to increase the injection depth from 2.34 to 5.34 inches. Terminal box at the end of the pipe (ordered separately) makes sensor replacement simple and allows operator to tighten control during sensor installation and removal under the pressure. Maximum pressure: 64 psi (2542 kPa). There are two types of devices (made of stainless steel) for sensor injection/removal. PN 23765-00 set is applied for 402-11/12/13 models and 23765-01 set is use for 402-14 PN model. The only difference between two sets is the length of a clip-on adapter coupling. The kit includes ball valve for 1-1/4 in., 1-1/4 in. connecting fitting with mechanical normal pipe thread (MNPT) and clip-on adapter coupling with graphite filler rings and retaining clip for sensor installation to the required injection depth.

Technological information and specifications
Characteristics MODEL
400/400 VP
MODEL
02/402 VP
MODEL
403/403 VP
MODEL
404
Cell constant 0.01/cm, 0.1/cm, 1.0/cm 0.01/cm,  0.1/cm, 1.0/cm,  10.0/cm 0.01/cm,  0.1/cm, 1.0/cm,  10.0/cm 0.01/cm, 0.1/cm,
Temperature interval  0-105°C
With option 60: 0-200°C
0-100ºС Options-11,  12,-13: 0- 105ºC (32 – 221ºF), sterilization up to  135ºС (275ºF) Option-16: 0-60ºC (32-140ºF)
Options-17: 0-100ºC ( 32-212ºF)
Pressure Max. 250 psi² (1825kPa) 200 psi ² (1481kPa) maximum extension pressure 64 psi², (542 kPa) 250 psi² (1825kPa) Option-16: 100 psi² (791 kPa) at 77ºF (25ºC 20 psi²  (239 kPa at 140ºF  (60ºC)

Option-17: 100 psi² (791 kPa)

Wetted materials Titanium, 316 stainless steel, PEEK, EPDM

 

Options -11, -12, -13: Titanium, 316 stainless steel, PEEK, EPDM, graphite, neoprene

Option-14: graphite, 316 stainless steel, Ероху, EPDM, neoprene

Titanium, 316
stainless steel, Kel-F, EPDM 
Option -16: Titanium, PEEK, PVC, EPDM, polyethylen

Option-17: Titanium, 303
stainless steel, PEEK, EPDM

Mounting type Cut-in Extendable (without process shutdown) Sanitary flange In-flow (low flow)
In-built cable 10 feet (3.1m)
standard
*additional 50 feet (15.2 m)
10 feet (3.1m)
standard
*longer length available
10 feet (3.1m)
standard *additional 50 feet (15.2 m) with terminal box option -60
10 feet (3.1m)
standard
*additional 50 feet (15.2 m)
Process connection ¾ ′′  MNPT 1-¼ ′′ MNPT
ball valve
-20  1-½ ′′ sanitary flange
-21  2′′ sanitary flange
3/8 ′′ serrated nozzle for plastic pipeline or  ¼ ′′ nozzle