396 family sensors

396 family sensors

396/396VP model

This model is designed to increase the lifespan of sensors

used in severe operating conditions when solution includes admixtures and abrasive particles.

Currently 396 model is supplied with glass electrodes by the Customer’s choice or with flat additional electrode or with standard spherical glass electrode for pH measurements.

Sensor is packed in a stainless steel casing with EPDM sealing. Simplified design is developed for Customer’s convenience, it does not require electrolyte addition or replacement of any parts.

396 model is supplied without integral preamplifier, therefore 396/396VP sensor is compatible with all device of Rosemount Analytical and other manufacturers.

396P/396PVP model

This model is specifically designed to increase the lifespan of sensors used in severe operating conditions during processing of acidic industrial sewage or in processing units, where a high-performance replaceable sensor is needed (sensor that does not require maintenance).

There are two configurations available: with glass or platinum (for Redox measurements) electrode.

396 model has a titanium earthing contact around pH/ORP electrode.

Sensor is encased in a polypropylene casing with EPDM filling that makes it resistant to destruction and chemical aggression.

396Р Rosemount Analytical model can be supplied with integral preamplifier converting рН or ORP signal into a stable signal with low noise level.

396R/396RVP model

This model is specifically designed to increase the lifespan of sensors used in severe operating conditions, where is it technically difficult to create control drain flow, but measurements require deep sensor immersion. Sensor can be used with 1-1/4 in. or 1-1/2 in. ball valve.

396R model sensor has a compressed polypropylene body encased in a titanium pipe with EPDM filling that makes it chemically resistant. Sensor has a titanium earthing contact used for sensor diagnostics.

There is a groove on the sensor face protecting glass electrode against damage and allowing to immerse sensor to a deeper depth ensuring high accuracy and reliability of measurements.

Characteristics

396/396VP model

396P/396PVP model

396R/396RVP model

Measured value and range

pH: 0-14

pH: 0-14

ORP: -1500 – +100 mV

pH: 0-14

ORP: -1500 – +100 mV

pH AccuGlass electrode options

Hemispheric electrode GPHT flat electrode GPHT

Hemispheric electrode GPLR flat electrode GPLR

Hemispheric electrode GPLR flat electrode GPLR

Wetted materials

316 stainless steel, polypropylene, EPDM, glass

Titanium, polypropylene, EPDM, glass, platinum (only for Redox)

Titanium, polypropylene, EPDM, glass, platinum (only for Redox)

Process connection

1″NPT  PN 23166-00 or 23166-01 (sold separately)

1″NPT

1-1/2 or 1-1/4 in. – with ball valve (sold separately) or

 1 in. without ball valve

Temperature range

0-100˚С

0-100˚С

0-100˚С

Pressure range

100-790 kPa (0-100 psig)

100-790 kPa (0-100 psig)

100-790 kPa (0-100 psig)

Maximum pressure during sensor removal/introduction 

No

No

Code 21: 542 kPa (64 psig)

Code 25: 343 kPa (35 psig)

Minimum conductivity

Nominal 75 µS/cm

100 µS/cm

Nominal 75 µS/cm

100 µS/cm

Nominal 75 µS/cm

100 µS/cm

In-built cable

4.6 m coaxial cable with BNC connector

Code 01: 11-core cable 7.7 m

Code 02: 4.6 m coaxial cable

Standard: 4.6 m coaxial cable

Code 60: 23.8 cm coaxial cable with BNC-connector

 Code 61: 23.7 cm coaxial cable

396/396VP model

This model is designed to increase the lifespan of sensors

used in severe operating conditions when solution includes admixtures and abrasive particles.

Currently 396 model is supplied with glass electrodes by the Customer’s choice or with flat additional electrode or with standard spherical glass electrode for pH measurements.

Sensor is packed in a stainless steel casing with EPDM sealing. Simplified design is developed for Customer’s convenience, it does not require electrolyte addition or replacement of any parts.

396 model is supplied without integral preamplifier, therefore 396/396VP sensor is compatible with all device of Rosemount Analytical and other manufacturers.

396P/396PVP model

This model is specifically designed to increase the lifespan of sensors used in severe operating conditions during processing of acidic industrial sewage or in processing units, where a high-performance replaceable sensor is needed (sensor that does not require maintenance).

There are two configurations available: with glass or platinum (for Redox measurements) electrode.

396 model has a titanium earthing contact around pH/ORP electrode.

Sensor is encased in a polypropylene casing with EPDM filling that makes it resistant to destruction and chemical aggression.

396Р Rosemount Analytical model can be supplied with integral preamplifier converting рН or ORP signal into a stable signal with low noise level.

396R/396RVP model

This model is specifically designed to increase the lifespan of sensors used in severe operating conditions, where is it technically difficult to create control drain flow, but measurements require deep sensor immersion. Sensor can be used with 1-1/4 in. or 1-1/2 in. ball valve.

396R model sensor has a compressed polypropylene body encased in a titanium pipe with EPDM filling that makes it chemically resistant. Sensor has a titanium earthing contact used for sensor diagnostics.

There is a groove on the sensor face protecting glass electrode against damage and allowing to immerse sensor to a deeper depth ensuring high accuracy and reliability of measurements.

Characteristics

396/396VP model

396P/396PVP model

396R/396RVP model

Measured value and range

pH: 0-14

pH: 0-14

ORP: -1500 – +100 mV

pH: 0-14

ORP: -1500 – +100 mV

pH AccuGlass electrode options

Hemispheric electrode GPHT flat electrode GPHT

Hemispheric electrode GPLR flat electrode GPLR

Hemispheric electrode GPLR flat electrode GPLR

Wetted materials

316 stainless steel, polypropylene, EPDM, glass

Titanium, polypropylene, EPDM, glass, platinum (only for Redox)

Titanium, polypropylene, EPDM, glass, platinum (only for Redox)

Process connection

1″NPT  PN 23166-00 or 23166-01 (sold separately)

1″NPT

1-1/2 or 1-1/4 in. – with ball valve (sold separately) or

 1 in. without ball valve

Temperature range

0-100˚С

0-100˚С

0-100˚С

Pressure range

100-790 kPa (0-100 psig)

100-790 kPa (0-100 psig)

100-790 kPa (0-100 psig)

Maximum pressure during sensor removal/introduction 

No

No

Code 21: 542 kPa (64 psig)

Code 25: 343 kPa (35 psig)

Minimum conductivity

Nominal 75 µS/cm

100 µS/cm

Nominal 75 µS/cm

100 µS/cm

Nominal 75 µS/cm

100 µS/cm

In-built cable

4.6 m coaxial cable with BNC connector

Code 01: 11-core cable 7.7 m

Code 02: 4.6 m coaxial cable

Standard: 4.6 m coaxial cable

Code 60: 23.8 cm coaxial cable with BNC-connector

 Code 61: 23.7 cm coaxial cable